3118云顶集团

    3118云顶集团(中国区)官方网站
    3118云顶集团(中国区)官方网站
    Hotline: +86-021-57278880
    Language: 3118云顶集团(中国区)官方网站   3118云顶集团(中国区)官方网站
    3118云顶集团(中国区)官方网站
    Your current location: ProductsAutomatic Control ValvePneumatic Fixed Ball Valve

    Q647F Pneumatic Fixed Ball Valve

    Product overview

    Product model: Q647F
    Nominal diameter: DN50~500mm
    Nominal pressure: PN1.6~6.4MPa
    Applicable temperature: -28℃ ~ 300℃
    Applicable medium: water, steam, oil, nitric acid, acetic acid
    Drive mode: manual, pneumatic
    Structure length: GB1221-89
    Flange size: GB9113, JB79-59
    Inspection test: JB/T9092-99

    Q647F Pneumatic Fixed Ball Valve product details

    Pneumatic Fixed Ball Valve overview

    Q647F Pneumatic Fixed Ball Valve produced and sold by Baigang valve group, pneumatic ball valve, ball valve is a two-way valve, flow unlimited.The middle flange is connected by stud, and the upper and lower valve stem are provided with sliding bearings to reduce friction, and the operation is labor-saving and smooth.Under normal circumstances, when the low pressure seating rely on spring pre-tightening force to seat close to the sphere seal, high pressure, the formation of piston effect on the seat, under the effect of upstream medium pressure, make the seat clamp sphere to seal fixed ball valve, pneumatic, pneumatic ball valve, ball valve is widely used in process control system implemented on or off.


    Pneumatic Fixed Ball Valve technical parameters

    Valves transfer method Link form structure type Sealing surface Nominal pressure (MPa) Body material
    Ball valve 6-pneumatic 
           6s-pneumatic band manual     		4-flange
    		 Fixed ball straight F-Fluoroplastic 
           H-alloy steel 
           PPL     		1.6 
           2.5 
           4.0 
           6.4     		According to the table body 
           material code
    Nominal diameter DN (mm) 50-500
    Material code C P R
    The main parts Body WCB ZG1Cr18Ni9Ti ZG1Cr18Ni12Mo2Ti
    Ball board 2Cr13 1Cr18Ni9Ti 1Cr18Ni12MoTi
    Valve stem 2Cr13 1Cr18Ni9Ti 1Cr18Ni12MoTi
    Sealing ring Enhanced polytetrafluoroethylene alignment poly stupid
    filler Polytetrafluoroethylene flexible graphite
    Fitness 
           with 
           working
           conditions     		Suitable media Water, steam, oil Nitric acids Acetic acid
    proper temperature -28 ° C to 300 ° C
    Control type Double-acting / single-acting
    The role of type Cut / adjust
    input signal Electrical signal: 0 ~ 10mA, -4 ~ 10mA gas signal 20 ~ 100kPa
    Reply voltage AC220V / DC24V
    Working medium Purification compressed gas
    Actuator model GT series, HY series, AW series, ZSH series
    Air pressure 0.4 ~ 0.7MPa




    Pneumatic Fixed Ball Valve installation dimensions

    3118云顶集团(中国区)官方网站

    Nominal diameter DN (mm) Size (mm) Actuator model
    1.6MPa 2.5MPa 4.0MPa
    L D D1 B Z-φD L D D1 B Z-φD L D D1 B Z-φD
    50 203 160 125 16 4-18 216 160 125 20 4-18 216 160 125 20 4-18 Optional GTD / GTE, 
           AW / AWS, HY, 
           ZSH series actuators 
           (the above optional only for the 
           specific election based on actual requirements)
    65 222 180 146 18 4-18 241 180 145 22 8-18 241 180 145 22 8-18
    80 241 195 160 20 8-18 283 195 160 22 8-18 283 195 160 22 8-18
    100 305 215 180 20 8-18 305 230 190 24 8-23 305 230 190 24 8-23
    125 356 245 210 22 8-18 381 270 220 28 8-25 381 270 220 28 8-25
    150 394 280 240 24 8-23 403 300 250 30 8-25 403 300 250 30 8-25
    200 457 335 295 26 12-23 502 360 310 34 12-25 502 375 320 38 12-30
    250 533 405 355 30 12-25 586 425 370 36 12-30
    300 610 460 410 30 12-25 648 485 430 40 16-30
    350 686 520 470 34 16-25 762 550 490 44 16-34
    400 762 580 525 36 16-30 838 610 550 48 16-34
    450 864 640 585 40 20-30 914 660 600 50 20-34
    500 914 705 650 44 20-34 991 730 660 52 20-41


    Reminder:

    All text, data and pictures in this article are for reference only.To see more details of the Q647F Pneumatic Fixed Ball Valve performance parameters, structural dimension parameters, pricing, etc., or to request high quality printing samples, please Contact us.

    Next：Pigging Valve
    Previous：Electric Eccentric Half Ball Valve
    +86-021-57278881
    qrCode
    sitemap、网站地图